Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Parts for University Park Homeowners
When a garage door stops working, the problem is usually a single worn component, not the whole door. A snapped torsion spring, a frayed cable, a roller that’s flat-spotted after years of dry Colorado air, or a bottom seal that’s cracked and letting cold air into the garage: any one of these can take a door out of service even though the panels, opener, and tracks are still sound. The right fix is the right part, installed by someone who knows your specific system.
Our technicians have up to 11 years of experience and are trained across eight major manufacturers, including Genie, Clopay, Amarr, and Wayne Dalton. We diagnose the failure, match the correct part to your door’s model and weight rating, and carry common components so many repairs are finished in one visit. If your door fails in University Park, call (844) 524-3396 and we’ll get a technician out to take a look, often the same day.
What Our Garage Door Parts Service Includes
Every garage door is a system of moving parts working under tension, and each component fails in its own way. Here’s what we handle, and what tells you it’s time to address it.
Torsion Spring
A torsion spring is the heavy coil mounted on the shaft above the door, and it does the actual lifting work so your opener doesn’t have to. When it breaks, you’ll hear a loud bang and the door won’t lift, or it will feel impossibly heavy if you try to raise it by hand. Spring replacement is one of the most dangerous jobs in garage door service, so we treat it as a specialized repair and never recommend attempting it yourself. A typical spring repair in University Park runs $180 – $340 for one spring; a matched pair is usually replaced together, so a pair costs about twice that range.
Extension Spring
Extension springs run along the horizontal tracks on either side of the door and stretch as the door closes. Older University Park homes often still have them, and they can fail suddenly after years of cycling. We inspect the springs, their safety cables, and the attachment points, then replace worn springs with the correct weight-rated parts for your door.
Cables & Drums
The lift cables wind around drums at each end of the torsion shaft and transfer spring tension to the bottom of the door. A frayed or snapped cable is a serious safety issue, since the door can drop or come off its tracks. We inspect cables for fraying, kinks, and drum wear, and replace the pair when one shows damage. Cable repair typically runs $130 – $250 and is not a job to put off.
Rollers & Hinges
Rollers ride inside the tracks and hinges connect the panels, and both take a beating in dry Front Range air. Flat-spotted steel rollers make a door rumble and drag; worn hinges let panels sag and rattle. We replace rollers and hinges with smooth-rolling, quiet components suited to your door’s weight and cycle count.
Weatherstripping
Weatherstripping seals the sides and top of the door against drafts, dust, and pests, and it hardens and cracks faster in Colorado’s dry climate than in humid regions. If you can see daylight around the door frame or feel cold air coming in on a windy day, the seals are past their prime. We replace perimeter weatherstripping so the door closes tight.
Bottom Seal
The bottom seal is the rubber or vinyl strip along the bottom edge of the door, and it’s the part most exposed to the concrete and to sun. A cracked or torn bottom seal lets in cold air, water, and debris, and it can let a door sit unevenly. We match the seal profile to your door and install a fresh one that makes proper contact across the whole opening.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Parts
We work on the equipment that’s actually in your garage, not just the brands that are easiest to source. That means Clopay doors and their panel and hinge systems, Amarr doors and their hardware, and Genie openers and the parts that wear around them.
We also service Wayne Dalton equipment, including the unique hardware and spring configurations some of their models use, and we know where those systems tend to wear out first. Because we source parts across multiple major brands, we can often match a component on the first visit instead of waiting on a single-brand back order. Whether you have Genie or any other make, we can help.
Signs You Need Garage Door Parts Right Now
- A loud bang from the garage. This is the classic sound of a torsion spring breaking. The door may still be closed but won’t lift, and the spring is now under no tension. Stop using the door and call us; this is a safety issue, not a wait-and-see one.
- The door feels very heavy when you lift it by hand. A properly balanced door lifts with modest effort. If it feels like dead weight, a spring or cable has failed, and using the opener can burn out the motor. Call (844) 524-3396 and we’ll take a look.
- The door shakes, rumbles, or squeals as it moves. Worn rollers and dry hinges cause this, and left alone they wear the tracks and stress the opener. A roller and hinge replacement is an inexpensive fix that prevents bigger problems.
- Daylight or cold air around the door edges. Cracked weatherstripping or a torn bottom seal lets in drafts and moisture. Replacing the seals restores a tight fit and keeps your garage warmer in winter.
- The door hangs crooked or comes off its track. A frayed cable, a bent track, or a broken drum can cause this. Don’t run the opener; the door can drop or shift further. This needs a technician to inspect and correct.
Our Garage Door Parts Process – Step by Step
- 1
Diagnose the failure. We start by testing the door’s balance and tension, checking the springs, cables, drums, rollers, hinges, and seals, and listening to the door cycle. We identify the specific part that failed and whether related components are near the end of their life.
- 2
Explain what we found. We walk you through the diagnosis in plain language, show you the worn parts, and lay out the options. We don’t push a full replacement when a targeted fix will do.
- 3
Match the correct part. Garage door parts are weight- and model-specific, so we match the spring rating, cable gauge, roller type, and seal profile to your door. Cross-brand parts access means we can often source the right component without a special order.
- 4
Quote before we start. You get a written estimate with the part and labor cost, and you approve it before any work begins. The price we quote is the price you pay.
- 5
Install and test. We install the part, rebalance the door, cycle it several times, and check that it opens and closes smoothly and safely. We also flag any other components that should be watched.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Parts Cost in University Park?
Garage door parts pricing depends on the component, the door’s size and weight, and the parts needed to complete the repair properly. A typical spring repair in University Park runs $180 – $340 for one spring, with a matched pair running about twice that range because both springs are usually replaced together. Cable repair typically runs $130 – $250, roller and hinge replacement around $110 – $220, and weatherstripping or bottom seal replacement is at the low end of that parts spectrum. Larger repairs, like panel replacement, run $250 – $500.
What affects the price: the door’s weight rating, whether the failure is a single part or a set that should be replaced together, and the specific part profile. How to avoid overpaying: get a written estimate before work starts, ask whether related components should be replaced at the same time to avoid a second visit, and be wary of anyone who quotes a full replacement when a targeted part fix will solve the problem. Our free estimate includes a diagnosis, a parts match, and a written price. The written estimate sets the final price.
Garage Door Parts Near University Park – Our Service Area
We connect homeowners across University Park with local professionals for garage door parts and repair, and we reach nearby neighborhoods including Platt Park, Virginia Village, and Washington Park. If you’re searching for garage door parts in a neighboring area, we can help there too. For repairs and parts calls, we aim to get a technician out quickly, with same-day service available in many cases. Call (844) 524-3396 to check availability for your address.
Serving University Park, CO – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Parts in University Park
Garage door parts are the components that make the door move and seal: springs, cables, drums, rollers, hinges, weatherstripping, and bottom seals. The parts that fail most often are torsion springs and cables, because they carry the door’s weight under constant tension. Rollers and seals wear more gradually but should be replaced when they cause noise or drafts.
Most parts repairs, like a spring, cable, or roller replacement, take a couple of hours once we’re on site. A spring replacement is a focused job; a full hardware refresh with rollers, hinges, and seals can take longer. We give you a time estimate when we quote, and we confirm before we start.
Typical estimated ranges: spring repair $180 – $340 for one spring (a pair costs about twice that), cable repair $130 – $250, roller replacement $110 – $220, and panel replacement $250 – $500. The written estimate sets the final price. Call (844) 524-3396 for an exact quote; estimates are free.
Yes. We’re trained across eight major manufacturers, including Genie, Clopay, Amarr, and Wayne Dalton. That means we know the specific hardware and spring configurations those brands use, so we can match the right part to your door rather than guessing. Whether you have Genie or another make, we can help.
Same-day service is available for many repairs, especially spring and cable failures. Availability depends on the part needed and our schedule that day. Call (844) 524-3396 early, and we’ll tell you what we can do for your address.
We stand behind our work, and we’ll review the specific coverage for your repair with you before we start. The written estimate spells out the parts and labor, and the price we quote is the price you pay. If you have questions about a specific repair, call (844) 524-3396.
Clear the area under and around the door so the technician has room to work, and if the door is stuck or has a broken spring, leave it closed and don’t run the opener. Have your door’s model or any paperwork handy if you have it, though we can usually identify the system on inspection. If the door won’t close all the way, don’t force it.
Schedule Your Garage Door Parts Service in University Park Today
If your garage door has a broken spring, a frayed cable, or a seal that’s letting in the cold, we can help. Call (844) 524-3396 for a free estimate in University Park and surrounding neighborhoods. We diagnose the failure, match the right part to your system, and quote before we start. Same-day service is available for many repairs, and we can also help with garage door parts in nearby Virginia Village and Platt Park.
Written by the team at University Park Garage Door Repair Pros.