Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in University Park?
Panel replacement in University Park typically costs $250 – $500 for a single section, including the panel itself and the labor to fit it. Upper sections usually land toward the low end of that range, and bottom sections cost more because they carry the bottom seal, brackets, and often a section of hinge hardware. When more than one panel is damaged, the estimate goes up by the per-section price rather than doubling the whole figure, and the written estimate you get before any work begins sets the final price.
Most of the panel jobs we help with in University Park come down to one section of the door, not the whole door. A backed-into bottom panel, hail that came in sideways across a driveway, or a dented top section from a leaning ladder. If the rest of the sections are sound, replacing that one panel keeps a good door in service and costs a fraction of a new door. If the damage runs across several sections, the math changes, and we’ll tell you when it does instead of pushing a repair that won’t hold.
Our technicians have up to 11 years of experience, and the local pro we connect you with is licensed and insured as their state requires. Estimates are free, and we work on the door you already have across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems.
Panel Replacement Cost Breakdown (2026)
Here’s how the pieces of a panel replacement job stack up in the University Park market. These are typical estimated ranges, not quotes. The written estimate is what counts.
| Line item | Typical estimated range |
|---|---|
| Single panel replacement (one section, labor included) | $250 – $500 |
| Bottom section replacement (with seal and brackets) | $300 – $500 |
| Upper or mid-section replacement | $250 – $420 |
| Panel replacement plus track realignment | $120 – $240 added for the track work |
| Panel replacement plus cable repair (when cables are stressed) | $130 – $250 added for the cable work |
| Roller replacement while the door is apart | $110 – $220 |
| Full garage door repair (broader damage) | $150 – $600 |
| New door installation (when panels can’t be sourced) | $700 – $2200 |
What pushes a panel job up? The biggest factor is which section got hit. Bottom sections carry more hardware and usually need a new bottom seal, so they sit at the high end of the range. Next is whether the panel is still made. A Clopay or Amarr panel in a current profile is straightforward to source. A discontinued Wayne Dalton or older Raynor profile can take longer and cost more, and occasionally we reach a point where a full new door makes better financial sense than chasing a rare section. Finally, damage rarely stays in one place. A dented panel often comes with a bent track, a stressed cable, or a set of rollers that took the same hit, and those add line items. Catching it early keeps the job in the $250 – $500 band.
What Affects Panel Replacement Pricing in University Park
- Section position. Bottom panels cost more than upper panels. They take the brunt of daily use, they hold the bottom seal and the brackets, and the hardware has to come off and go back on. A top section swap is a simpler job and often lands closer to $250.
- Panel profile and availability. University Park has a mix of older homes with long-panel doors and newer builds with raised-panel or carriage-style sections. A current profile from a major brand is quick to source. A discontinued profile takes longer, and the price reflects the search.
- Whether the panel is insulated. Non-insulated steel panels sit at the bottom of the range. Insulated panels and wood or composite sections cost more because the material costs more. We quote the panel that matches what’s already on your door, not a substitute.
- Matching color and texture. A panel has to match the rest of the door, and older doors have faded. Sometimes the closest current color is a near-match rather than an exact one, and we’ll show you the options before ordering.
- Colorado hailstorms. The Front Range hail season is the single most common reason panel replacement comes up in University Park. Hail hits the door face and leaves dents that a paint touch-up won’t fix, and insurance may cover it, so it’s worth checking with your insurer before you assume the whole cost is yours.
- Condition of the surrounding hardware. If the hinges, rollers, or cables were stressed in the same incident, replacing the panel without addressing them means a second visit later. We price the whole picture up front so there’s no surprise.
One more thing that affects price: whether the door stays on the tracks and runs safely afterward. A bent track caused by the same impact that dented the panel needs realignment so the door doesn’t bind, and we’d rather quote that than hand back a door that shudders on the way up. Track realignment is $120 – $240 on top of the panel work when it’s needed.
How to Save on Panel Replacement
The biggest saving on panel replacement is catching the damage while it’s still one section. A small dent that’s left alone can let water in and rust the steel, and rust spreads along a panel seam fast in a wet spring. Here’s what actually helps:
- Get it looked at before winter. A dented steel panel with a paint crack will rust through the winter when meltwater sits in the seam. Fixing it in the fall usually keeps it to one panel.
- Check your insurance. Hail damage to a garage door is often claimable, and a panel replacement may fall under your policy. We can work with your insurer and give you a written estimate you can submit.
- Replace the panel, not the door. If the rest of the sections are straight and the door runs true, a single panel is the cheaper path by a wide margin. We’ll tell you honestly when a repair will hold and when it won’t.
- Bundle related fixes in one visit. If the rollers or a cable took the same hit, doing it at the same time avoids a second callout and the labor that comes with it.
- Ask for a free estimate. We don’t charge to come out and tell you what’s wrong and what it will cost. Call (844) 524-3396 and we’ll book it.
The right part, right visit mindset matters here. When the panel type and any related hardware are identified up front, the job finishes in one trip instead of a source-then-return second visit. That’s the difference between a $250 – $500 panel job and paying for labor twice.
Why the Brand in Your Door Matters for Pricing
Panel replacement is not a universal part. A Clopay panel doesn’t fit a Wayne Dalton door, and a Genie opener’s door section has its own profile. That’s why we work across eight major manufacturers rather than one: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When we know your brand and model before we arrive, we can quote accurately and order the right section the first time. When a generalist handyman shows up and figures it out on site, you pay for the second visit and the wait.
Diagnosed, not guessed, is how we approach it. We look at the section, the profile, the color, and the door’s balance before we quote. If the panel is discontinued, we say so rather than order something that almost fits. And because we source across multiple brands, a part for one brand doesn’t hold up the job the way a single-brand shop can get stuck waiting on a back order.
If the damage goes beyond a panel, it’s worth knowing the full range of what we handle. We cover University Park Garage Door Repair Pros for everything from opener service to new-door installation, and our technicians are trained on the specific mechanics of your system. Panel work is one part of that, and it’s the part most homeowners actually need after a hard knock or a hail season. For the narrower question of how a single section is replaced and what it involves, our page on panel replacement walks through the process step by step. If the springs took the impact rather than the panel, that’s a different job entirely, and spring repair in University Park is $180 – $340 for one spring, with a matched pair usually replaced together at about twice that. Opener problems run $120 – $320 to repair, and a full opener installation is $250 – $550.
Safety: What Not to Touch Yourself
We’ll be direct about this. Garage door springs and the cables and torsion bar that hold them are under high tension, and they can release violently with no warning. Panel replacement itself looks simple, but getting a section off and back on safely means the door has to be supported, the tension has to be managed, and the tracks have to be rechecked afterward. Many injuries on garage doors happen to homeowners who tried to help. If you’re considering anything beyond cleaning the door face or checking that the bottom seal is intact, call a trained technician. We’re happy to walk you through what to inspect from a safe distance so you know whether you have a problem, but the work under tension belongs to a pro.
FAQs – Panel Replacement Cost
How much does panel replacement cost in University Park?
Panel replacement in University Park typically costs $250 – $500 for a single section with labor included. Bottom sections run toward the higher end because they carry the seal and brackets, and upper sections usually come in near $250 – $420. Call (844) 524-3396 for an exact quote on your door; estimates are free.
Is it cheaper to repair the panel or replace the whole door?
Repairing a single panel is almost always cheaper, at $250 – $500 versus $700 – $2200 for a new door installation. A new door only makes sense when several sections are damaged, the panel profile is discontinued, or the door is failing structurally. We’ll tell you which side of that line your door is on before you commit. Call (844) 524-3396 to talk it through.
Does insurance cover hail damage to garage door panels?
Often it can, depending on your policy and deductible, so it’s worth checking before you assume the full cost is yours. Panel replacement runs $250 – $500 for a single section, and we can give you a written estimate you can submit to your insurer. We can work with your insurer, and we’ll quote the repair the same way either way. Call (844) 524-3396 to get that estimate started.
Can you replace just one panel, or do all sections have to be replaced?
One panel can usually be replaced on its own at $250 – $500, as long as the profile is still available and the other sections are sound. Replacing every section is only necessary when the damage runs across several panels or the door is structurally compromised. Our technicians have up to 11 years of experience matching sections to existing doors. Call (844) 524-3396 and we’ll tell you which applies to yours.
Can you come today for a panel estimate?
We offer same-day service where scheduling allows, and a panel estimate itself is free. Panel replacement typically costs $250 – $500, and the sooner a dented section is looked at, the less chance rust turns a one-panel job into a two-panel job. Call (844) 524-3396 and we’ll book the earliest slot for your University Park address.
Pricing reflects the University Park market as of 2026. University Park Garage Door Repair Pros offers free estimates – call (844) 524-3396.
Written by the team at University Park Garage Door Repair Pros.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Steve Doyle"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Cole Anderson"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Brooke Bennett